IBM TotalStorage DS300 Best Practices Manual page 362

the target ID 64. Authentication configuration for this target will be configured
in the next steps.
Figure 7-188 SANsurfer — Target with failed session
28.Enter the configuration password. This needs to be done because the
authentication configuration contains plain text passwords.
Figure 7-189 SANsurfer — Security check
29.Define the username and password pair which will be used to authenticate
the host bus adapter against the iSCSI target. Click the green plus button in
the CHAP Entries list to add a empty line in this list.
344
IBM TotalStorage DS300 and DS400 Best Practices Guide