IBM TotalStorage DS300 Best Practices Manual page 151

Figure 4-88 Configuration options
4. Hold Ctrl and click the two drives which will build the array (the first two drives
selected to build the first array). Then click the Add selected drives to array
button. See Figure 4-89.
Figure 4-89 Select drives for the new array
5. The selected drives will move from the left panel to the right panel. The tab
named New array will change to Array-1 and a new tab with name New
array is created. See Figure 4-90 on page 134.
Chapter 4. TotalStorage DS300 and DS400 management
133