IBM TotalStorage DS300 Best Practices Manual page 296

Two ethernet controller (function 0 and 2)
– These devices refer to the gigabit ethernet adapter functionality of the
QLogic iSCSI Expansion Card.
– After driver installation they will appear in the Network adapters tree of
the device manager.
Two network controller (function 1 and 3)
– These devices refer to the iSCSI adapter functionality of the QLogic iSCSI
Expansion Card.
– After driver installation it will appear in the SCSI and RAID controllers
tree of the device manager.
The drivers can be found via the following URL:
http://www.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lndocid=MI
GR-60280
To install the drivers for the QLogic iSCSI Expansion Card follow these steps:
1. Open the Device Manager. Right-click the first Ethernet Controller in the
Other devices tree. Click Update Driver....
Figure 7-81 Windows device manager with unknown devices (BladeCenter iSCSI HBA)
2. In the Welcome to the Found New Hardware Wizard select No, not at this
time and click Next.
278
IBM TotalStorage DS300 and DS400 Best Practices Guide