Figure 4-35 Confirm removal of the Management Station
3. Management Station is removed.
Figure 4-36 Removed Management Station
4.7.4 Add an agent to a Management Station
The agent represents a IBM TotalStorage DS300 or DS400. After adding the
agent to a Management Station you will be able to manage a TotalStorage
DS300 or DS400.
Note: An agent can only be managed by one Management Station. Before a
agent can be managed from an other Management Station, the agent must be
removed from the original Management Station. See 4.7.5, "Remove an agent
from a Management Station" on page 104 for the details of removing a agent
from a Management Station.
Perform the following steps to add an agent to a Management Station:
1. In the Enterprise view, right-click the Management Station in the Networked
storage tree and select Add agent.
102
IBM TotalStorage DS300 and DS400 Best Practices Guide