Boot Microsoft Windows Server 2003 From Ds400 With The Ibm Ds4000 Fc2-133 Host Bus Adapter - IBM TotalStorage DS300 Best Practices Manual

27.Select Reboot System end press Enter.
Figure 9-88 Reboot system
More logical drives my be added now. The setup is completed and the testing of
the setup can start.
9.2 Boot Microsoft Windows Server 2003 from DS400
with the IBM DS4000 FC2-133 Host Bus Adapter
The setup of an IBM ^xSeries 236 with two IBM DS4000 FC2-133 host
bus adapters connected with multiple paths to a TotalStorage DS400 will be
explained in detail. The IBM ^xSeries 236 will use the TotalStorage
DS4000 FC2-133 host bus adapter to boot from the TotalStorage DS400.
9.2.1, "Planning and considerations" on page 502
9.2.2, "SAN and network setup" on page 502
9.2.3, "TotalStorage DS400 setup" on page 504
9.2.4, "Host bus adapter setup and installation preparation" on page 509
9.2.5, "Create IBM DS4000 Host Bus Adapter driver disk" on page 528
9.2.6, "Microsoft Windows Server 2003 Enterprise Edition installation" on
page 529
Chapter 9. TotalStorage DS400 installation
501