IBM TotalStorage DS300 Best Practices Manual page 194

DS300-1[A]# snapshot create DANUBE-MAIL-S1 DANUBE-MAIL readonly restricted
WARNING - all initiators MUST be disconnected to
prevent loss of data - proceed?
[No]: yes
Please wait....
Created the snapshot called DANUBE-MAIL-S1
Warning - this logical drive cannot be accessed until an ACL is defined for
it
DS300-1[A]#
Figure 4-156 Create snapshot
4. From the ServeRAID Manager console, the Flashcopy logical drives can be
seen, deleted, access control and authentication be managed like every other
logical drive as well. See 4.8, "IBM TotalStorage DS300/DS400 array and
logical drive management" on page 113.
5. ServeRAID Manager console shows the created Flashcopy target logical
drives with its own symbol to differentiate between regular logical drives and
the Flashcopy target logical drives. Figure 4-157 on page 177 shows two
Flashcopy target logical drives COLORADO-DB-2005.08.19.001 and
COLORADO-DB-2005.08.19.002.
176
IBM TotalStorage DS300 and DS400 Best Practices Guide