IBM TotalStorage DS300 Best Practices Manual page 502

DS400[A]# initiator manage RIOGRANDE-S3-(0) info
----[ Initiators ]---------------------------------------------------------
----[ Initiator 'RIOGRANDE-S3-(0)' ]---------------------------------------
---------------------------------------------------------------------------
---------------------------------------------------------------------------
DS400[A]# initiator manage RIOGRANDE-S3-(0) allow A1 B0 B1
Access allowed to initiator RIOGRANDE-S3-(0) on ports A1 B0 and B1
DS400[A]#
Figure 9-57 Initiator information
6. Reboot the server and verify after reboot that you see 4 drives in the device
manager and one multipath device.
IBM FAStT MSJ shows 4 targets and every target has one LUN. This is
correct.
484
IBM TotalStorage DS300 and DS400 Best Practices Guide
WWN: 210000e08b17d774
Alias: RIOGRANDE-S3-(0)
ID: 4
Port access:
Port A0
YES
LUN Mappings:
LUN
0
Port A1 Port B0
NO NO
logical [Capacity]
RIOGRANDE-BOOT [ 10.00GB]
Port B1
NO