IBM TotalStorage DS300 Best Practices Manual page 134

Figure 4-58 Configuration options
4. Hold Ctrl and click the two drives which will build the array. Select drives with
ID 0 and 1. These two drives will build the first array which will be a RAID 1
array. See Figure 4-59.
Figure 4-59 Select drives for new Array-1
5. Click the Add selected drives to array button. This is the button with the
single drive symbol. The selected drives will be assigned to the new array on
the right site. The name of New array will change to Array-1 and a new tab
with name New array is created. Figure 4-60 on page 117.
116
IBM TotalStorage DS300 and DS400 Best Practices Guide