Cli Parameter Glossary - IBM TotalStorage DS300 Best Practices Manual

You can request help at any time by typing help or ? anywhere in a line. The
depth of help information provided (e.g., valid commands or parameters, or all
available commands) depends on where you are in the CLI.
A.1.2.6 Viewing Long Reports
When a command generates a report (including help messages) that is more
than one page long, the first page is displayed. Other parts of the report may be
viewed by using the keystrokes shown in the next Table.
Keystroke
B
D or J
E or >
H or ?
N or F or <Enter> or <Space>
P or <
Q
R or <F5>
U or K
A.2 CLI parameter glossary
This section provides definitions for parameters used in the rest of this appendix
to describe the commands and options of the CLI.
absolute_date
This defines an absolute time and date in the range 1970 to 2036. Unless it is
explicitly mentioned, the time is relative to the current time zone.
The absolute_date parameter can include date and time, date only, or time only.
When no time is entered, the system assumes a time of 00:00:00. When no date
is entered, the system assumes the current date.
The date has three fields, day, month, year, which can be expressed in any of the
common formats, with a `/' character separating each field:
570
IBM TotalStorage DS300 and DS400 Best Practices Guide
Function
Previous page
Down to next line
Advance to end of report
Display this list
Next page
Back to first page
Quit report
Redraw current page
Up to previous line