Microsoft Windows Server 2003 Enterprise Edition Installation - IBM TotalStorage DS300 Best Practices Manual

9.2.6 Microsoft Windows Server 2003 Enterprise Edition installation

The installation of Windows 2003 is straight forward as already known. The driver
of the TotalStorage DS4000 FC2-133 host bus adapter is included on the
Microsoft Windows Server 2003 Enterprise Edition CD. However, this driver is to
old and may not detect disks. Thus requires to create a driver diskette first. See
chapter Create IBM DS4000 Host Bus Adapter driver disk about the creation of
the driver disk.
1. The system is still in the Host bus adapter BIOS setup. Select Reboot
System and press Enter to leave the setup and restart the system now.
Figure 9-118 Exit Fast!UTIL img_8420.gif 500DPI
2. Insert the installation CD into the CD-ROM drive and boot from this CD. After
the message Setup is inspecting your computer was shown the black screen
will switch to blue and the bottom line give you the option to press F6 to install
third party SCSI or RAID drives which are required at boot time. Press F6 to
install the driver for the IBM TotalStorage DS4000 FC2-133 host bus adapter.
Chapter 9. TotalStorage DS400 installation
529