Scope Manage Scope Commands - IBM TotalStorage DS300 Best Practices Manual

Hide thumbs Also See for TotalStorage DS300:

Table of Contents

create name [logical_drive_list]

Create a new scope called name which must not be the same as any other

scopes. Optionally, add one or more targets to it immediately with the

logical_drive_list list.

destroy name_list

Destroy the named scopes in the name_list list.

info [name_list]

Show information about all of the scopes if name_list is not supplied, or the

scopes named in the name_list list if it is supplied. This is the same as the scope

manage name info command if name_list consists of a single scope.

List all of the known scopes.

A.30.1 Scope Manage Scope commands

These commands control the logical drives in a specific scope. They are

available after the global scope manage scope command. They may also be used

as global commands by preceding them by scope manage scope or from the

scope context by preceding them by manage scope.

IBM TotalStorage DS300 and DS400 Best Practices Guide

name [logical_drive_list]

[ name_list]

name (See Scope Manage Scope commands)

logical_drive_list

administrator

logical_drive_list

administrator

administrator

Totalstorage ds400