IBM TotalStorage DS300 Best Practices Manual page 310

The second port will be configured without the usage of the wizard and with
help of an iSNS service.
Setup of Port 0 with the wizard
1. Start the iSCSI SANsurfer Management Software by using the SANsurfer
desktop icon or use the start menu by clicking Start → Programs → QLogic
Management Suite → SANsurfer. In SANsurfer GUI click the Connect
button.
Figure 7-101 SANsurfer Manager — unconnected
2. In the Connect to Host window select localhost or enter the IP address of
the host where the agent was installed. CLick Connect.
Figure 7-102 Connect to host window
3. SANsurfer connects to the specified host and presents a list of installed
HBAs. The left site of the window contains host information.
292
IBM TotalStorage DS300 and DS400 Best Practices Guide