Logical Manage Logical Commands - IBM TotalStorage DS300 Best Practices Manual

logical_drive available_array available | size
Create a new logical drive with a user name of name. The logical drive takes its
space from the named array. If the available option is entered, all of the
available space in that array is used. If the size option is used, the size
parameter is the size in bytes.
destroy logical_list
Destroy the named logical drives.
info [logical_list]
Show information about all of the logical drives if the logical_list list is not
supplied, or just the named logical drives if it is supplied. For a single logical
drive, this is the same as the logical target info command.
list
List the logical drives known to the system.
A.22.1 Logical manage logical commands
These commands manipulate the attributes of the specified logical drive. They
are available after the logical manage logical command, or can also be run as
global commands by preceding them by logical manage logical or by just
manage logical from the logical context.
Command
growby
growto
info
new_name
growby size
Grow the logical drive by the amount specified by size.
growto size
Grow the logical drive to the amount specified by size.
info
Output information about this logical drive.
606
IBM TotalStorage DS300 and DS400 Best Practices Guide
Parameters Levels
size administrator
size administrator
all rename
administrator