8.2.1 DS400 single controller direct attachment
The DS400 single controller model has two Fibre Channel ports. Thus it allows
the direct attachment of up to two host systems, each having a single path to the
DS400.
Figure 8-1 DS400 single controller direct attachment
8.2.2 DS400 single controller fabric attachment
In case that more than two host systems should be attached to a DS400 single
control model, a SAN switch is necessary. Figure 8-2 on page 436 shows a
configuration with a SAN switch which allows additional host systems to be
connected to the DS400.
Chapter 8. TotalStorage DS400 example configurations
435