Delete Arrays On Total Storage Ds300 And Ds400 - IBM TotalStorage DS300 Best Practices Manual

Figure 4-115 Applied configuration

4.8.3 Delete arrays on Total Storage DS300 and DS400

Arrays can be deleted. When an array is deleted, all logical drives of this array
are deleted as well.
Note: Working with the CLI and deleting arrays requires that all logical drives
be deleted first. See callout boxes for example commands.
1. Arrays are deleted by selecting the array → right-click → Delete array. All
logical drives defined in the array also deleted. Initiators or user accounts are
not deleted.
Chapter 4. TotalStorage DS300 and DS400 management
147