Microsoft Windows Server 2003 Enterprise Edition Installation - IBM TotalStorage DS300 Best Practices Manual

9.1.6 Microsoft Windows Server 2003 Enterprise Edition installation

The installation of Windows 2003 is straightforward. The driver of the IBM SMB
Host Bus Adapter is not included on the Microsoft Windows Server 2003
Enterprise Edition CD. This requires you to create a driver diskette first. See
9.1.5, "HBA driver disk creation" on page 468 for information the creation of the
driver diskette.
1. The system is still in the host bus adapter BIOS setup. Select Reboot
System and press Enter.
Figure 9-32 Reboot system
2. Insert the installation CD into the CD-ROM drive and boot from this CD. After
the message Setup is inspecting your computer was shown the black screen
will switch to blue and the bottom line give you the option to press F6 to install
third party SCSI or RAID drives which are required at boot time. Press F6 to
install the driver for the IBM SMB Host Bus Adapter.
Chapter 9. TotalStorage DS400 installation
469