IBM TotalStorage DS300 Best Practices Manual page 99

----[ IBM DS300: Command Line Interface ]----------------------------------
Copyright: IBM (c)2003-2004
Firmware: IBM TotalStorage DS Series (Build 0750)
Peer controller status: Ready
Typing 'help': provides an overview of the commands available to
TAB key: use the TAB key as a means of getting assistance
DS300-1[A]> administrator
Administrator level password: ********
DS300-1[A]#
Figure 4-5 Telnet logon
2. Get the current network settings of the first iSCSI interface on controller A by
entering the command interface manage eth2[A] info. There is no IP
address defined for this interface. See Figure 4-6 on page 82.
Chapter 4. TotalStorage DS300 and DS400 management
[27/07/2005][6.21]
configure the controller.
in completing any commands that you issue.
81