Enable Initiator Access To All Totalstorage Ds400 Ports - IBM TotalStorage DS300 Best Practices Manual

Hide thumbs Also See for TotalStorage DS300:

Table of Contents

Figure 9-51 Device Manager after installing DSM and MPIO

5. Reboot the server.

9.1.8 Enable initiator access to all TotalStorage DS400 ports

Microsoft Windows Server 2003 is installed along with the multipath drivers.

There are multiple paths available but no LUNs are accessible here. This step will

activate the ports of the TotalStorage DS400 for the initiators to gain access over

all ports. The access was restricted in 9.1.3, "TotalStorage DS400 setup" on

Figure 9-52 Assigned LUNs to the HBAs

Chapter 9. TotalStorage DS400 installation

Totalstorage ds400