IBM TotalStorage DS300 Best Practices Manual page 95

:::::: Factory Default State ::::::
----[ IBM DS300: Command Line Interface ]----------------------------------
Copyright: IBM (c)2003-2004
Firmware: IBM TotalStorage DS Series (Build 0750)
Peer controller status: Ready
Typing 'help': provides an overview of the commands available to
TAB key: use the TAB key as a means of getting assistance
Hostname [DS300]: DS300-1
Domain name [ibm.com]: rivers.local
SAN name []: RIVERSSAN
System Date [18:59:31@09/08/05]: 18:55:00@09/08/05
Timezone [GMT-5]: GMT-6
New administrator password? [No]:
New operator password? [Yes]: No
Default gateway [None]: 192.168.1.225
DNS servers [None]: 172.16.0.2 172.16.0.3
Use DHCP? [No]:
IP address [192.168.70.123]: 192.168.1.230
Netmask [255.255.0.0]: 255.255.255.224
Broadcast Address [192.168.255.255]: 192.168.1.255
Peer IP address [192.168.70.124]: 192.168.1.231
Peer Netmask [255.255.0.0]: 255.255.255.224
Peer Broadcast Address [192.168.255.255]: 192.168.1.255
Finish? [Yes]:
Please wait...
Figure 4-3 Setup wizard
The setup wizard can be started again by running system setup.
Chapter 4. TotalStorage DS300 and DS400 management
[27/07/2005][6.21]
configure the controller.
in completing any commands that you issue.
77