Initiator Commands (Fc) - IBM TotalStorage DS300 Best Practices Manual

Hide thumbs Also See for TotalStorage DS300:

Table of Contents

Output information about this remote iSCSI initiator, including which other entities

(such as targets) refer to it.

piggyback enable | disable

Change the piggyback SCSI status of this remote iSCSI initiator.

ping enable | disable

Change whether to ping periodically to test the connection.

A.17 Initiator commands (FC)

These commands are available after the initiator global command and are

used to manage remote FC initiators. They can also be run as global commands

by preceding them by initiator.

Note: Remote FC initiators are also implicitly created by other commands.

create name WWN

Create a new remote FC initiator with the local name where WWN is the port

WWN of that initiator.

destroy initiator_list

Destroy the remote FC initiators in the initiator_list list. This removes all

references to these initiators from any volumes or other entities which refer to

initiator_list

[ initiator_list ]

initiator (See initiator manage initiator commands)

lunmapped | auto

Appendix A. Command line interface reference

administrator

administrator

Totalstorage ds400