IBM TotalStorage DS300 Best Practices Manual page 359

17.Click Yes.
Figure 7-180 SANsurfer — Warning
18.Enter the configuration password and click OK.
Figure 7-181 SANsurfer — Security check
19.The configuration changes will be saved and a configuration refresh is
requested by SANsurfer. Click Yes.
Figure 7-182 SANsurfer — iSCSI configuration change
20.Perform step 11 on page 337 to step 19 for each remaining host bus adapter
in both cluster nodes.
21.Next steps will configure the iSCSI targets accessed by each host bus
adapter.
Chapter 7. TotalStorage DS300 installation
341