Delete Logical Drives On Totalstorage Ds300 And Ds400 - IBM TotalStorage DS300 Best Practices Manual

logical destroy
Device-3
array destroy
Array-2
Figure 4-116 Select array to delete
2. Confirm the warning that all data of the logical drives in this array will be
deleted by clicking Yes.
Figure 4-117 Array — data loss warning
3. After a while the change is applied and the array with the logical drive does
not longer exist.
Note: Flashcopy target logical drives in this array must be deleted first.

4.8.4 Delete logical drives on TotalStorage DS300 and DS400

This section will explain how to delete logical drives. Follow the steps below:
1. Logical drives are deleted by selecting the logical drive with a right-click →
Delete logical drive. The Delete logical drive button or the context menu
might be used as well. Initiators or user accounts are not deleted when a
logical drive is deleted.
148
IBM TotalStorage DS300 and DS400 Best Practices Guide