Miscellaneous Equipment Specification (Mes) Instructions; Ess 3500 Storage Drives Concurrent Mes Upgrade - IBM Elastic Storage System 3500 Service Manual

Table of Contents

Advertisement

Figure 26. Securing the enclosure
7. Place the IBM brand label on the right ear cap.
Place the IBM brand label onto the right ear cap within the square area, as highlighted in Figure 27 on
page 17.
Figure 27. Displaying IBM brand label location
If an MTM/SN label is needed to be placed on the left ear cap, contact IBM Quality Hotline for more
information.

Miscellaneous equipment specification (MES) instructions

An IBM Elastic Storage System 3500 hardware change can be done by using the MES instructions.

ESS 3500 storage drives concurrent MES upgrade

An online IBM Elastic Storage System 3500 MES upgrade is supported for customers who want to
upgrade a 12-drive IBM Elastic Storage System 3500 to a 24-drive IBM Elastic Storage System 3500.
To upgrade the system, the NVMe drives with the same size as the existing 12 drives must be used. This
MES upgrade doubles the available storage capacity in the existing IBM Elastic Storage System 3500. For
this concurrent upgrade, it is suggested to complete this operation during a period of low workload stress.
Existing customer recovery group and file system data are preserved during the MES upgrade.
Supported upgrade path: 12 NVMe IBM Elastic Storage System 3500 > 24 NVMe IBM Elastic Storage
System 3500
Chapter 1. Servicing (customer tasks)  17

Advertisement

Table of Contents
loading

Table of Contents