Attaching Clutch Cam Ass'y - TOHATSU MX 50D2 Service Manual

Lower Unit
b
q
nner nner
Face Face OBM OBM
OBM
e
3
1
2
6-96
a
0
8
c
OBM OBM
OBM
e
q
OBM OBM
OBM
Forward
Direction
A
Attach water pump liner 0 to pump case (upper) q.
5.
Align pump liner 0 protrusion a with pump
case (upper) q concave b.
Apply OBM grease to inside of water pump liner.
OBM
OBM OBM
Put pump case (upper) q and gasket (2 pcs.) on the drive
6.
shaft, and install them on the pump case (lower) w.
While installing pump case q, turn drive
shaft 8 clockwise to bend all impeller
blades in counterclockwise on power unit
direction.
OBM
OBM OBM
Attach water pipe seal e (RP).
7.
Apply OBM grease thinly on the inside c of water
pipe seal so that water pipe can be inserted
smoothly.

36) Attaching Clutch Cam Ass'y

Install clutch cam ass'y 1.
1.
Apply OBM grease to O ring of clutch cam ass'y,
and install the assembly by pushing cam rod
bushing into gear case.
Be careful of direction of clutch cam.
OBM
OBM OBM
Attach stopper 2 and bolt 3.
2.
CAUTION
CAUTION
2st 50D2 2011
GB