Disassembly Of Drive Shaft Ass'y - TOHATSU MX 50D2 Service Manual

Lower Unit
3 Bearings
Do not reuse.
3 Bearings
Do not reuse.
a
a Supporting Points
6-54

20) Disassembly of Drive Shaft Ass'y

1.
1
2.
3.
3
4
2
3
4
21) Inspection of Drive Shaft
1.
2.
a
22) Inspection of Pinion (B) Gear
1.
Remove outer shim 1.
Remove drive shaft spring 2.
Remove ball bearings 3 by using press and universal
puller 4.
CAUTION
Do not reuse removed bearing.
Be sure to replace with new one.
· Check bearing for play or deflection before
removing, and replace if necessary.
· When putting universal puller plate on the
bearing, hook the tip of puller's claw on the inner
race of bearing correctly.
Universal Puller Plate 4 :
P/N. 3AC-99750-0
Check drive shaft for bend and wear.
Replace if necessary.
Measure drive shaft runout.
Runout Limit :
0.4 mm (0.016 in)
Check gear teeth and dog for crack, wear and damage.
Replace if necessary.
GB
2st 50D2 2011