Removing Forward (A) Gear Ass'y - TOHATSU MX 50D2 Service Manual

Lower Unit
4
6-60
1
2
1
3

24) Removing Forward (A) Gear Ass'y

Take out bearing 1 and forward (A) gear 2 by using a
1.
hand put in the gear case.
· Put mid finger into forward (A) gear hole and
take it between the finger and the first finger
(thumb), and lift the thumb side of the gear to
remove it.
· Take forward (A) gear out taking care not to hit
pinion (B) gear.
· For MWX50 models: Can not remove forward
(A) gear when removed pinion (B) gear.
Refer to P6-52, remove pinion (B) gear, and
then remove forward (A) gear.
25) Disassembly of Forward Gear (A)
Gear
Remove taper roller bearing 1.
1.
Use two bladed screw drivers to remove taper roller
bearing from forward gear (A) gear.
Put the drivers into grooves of forward (A) gear, and pry
out taking care not to damage the shim.
Be careful not to damage shim 3.
CAUTION
2st 50D2 2011
GB