Assembly Of Lower Unit Parts - TOHATSU MX 50D2 Service Manual

Hide thumbs Also See for MX 50D2:

34) Assembly of Lower Unit Parts

After installing forward (A)gear with taper roller bearing 1,

install drive shaft ass'y 2, pinion (B) gear 3 and pinion

(B) gear nut 4, and tighten the nut to specified torque.

· Tighten the nut by using a drive shaft socket 5

and a wrench and turning the wrench clockwise.

Cover the wrench 6 with rag to prevent it from

hitting the case directly.

· This work can be made easier when the opening

of gear housing of propeller shaft side is faced

upward and fixed horizontally with a holder.

· Before tightening pinion (B) gear and nut, apply

ThreeBond 1342 to the thread.

· Degrease taper area of drive shaft pinion (C)

gear installation section and thread of gear nut

2st 50D2 2011

Show Quick Links