Removing Throttle Link - TOHATSU MX 50D2 Service Manual

Power Unit
2 2
4 4
5 5
3 3
b b
a a
3 3
5-34
a a
2 2
b b
1 1
4 4
Remove all spark plug caps, ignition coils 2 and ground
2.
wires.
Disconnect ground wire 3 and CD unit 4, then remove
3.
electrical box 5.

4) Removing Throttle Link

Remove throttle link rod 1, 2.
1.
· Remove each link rod at the rod snap side a
first.
· When removing each link rod at the ball joint
side b, be careful not to apply force to the arm.
Loosen bolts, and then remove advancer arm 3 and
2.
advancer lever 4.
· Check ball joint cap, rod snap for wear and
damage link rod for bend.
· After removal, use rubber band on bolt to keep
assembly together.
GB
2st X50D2 2011