Carburetor Synchronization - TOHATSU MX 50D2 Service Manual

Maintenance
1 1
2 2
3 3
3-26
3 3
5 5
0mm 0mm
0mm 0mm
4. Place advancer arm in the minimum speed position
(throttle fully closed) and adjust low, speed side stopper so
ignition timing matches the following specifications.
Ignition Timing-Throttle closed : ATDC 3°

11) Carburetor Synchronization

1. Remove the intake silencer cover.
Disconnect ignition timing link 1 and throttle link 2 so
2.
throttle lever roller dose not make contact with throttle
cam.
Adjust the length of each carburetor throttle link rod 3 to
3.
following specification.
Link Length : 90 mm (3.54 in)
4. Reconnect timing link.
GB
2st X50D2 2011