Before working on the engine, check that hull, rigging and engine installation are normal. For mechanical
troubleshooting, refer to relevant troubleshooting section in this chapter. For checking and servicing the
machine, refer to service procedures described in this manual to perform the works safely.
2.Power Unit
State 1
Engine will not start.
heck that gear shift is in
neutral (N).
Neutral (N)?
ES
heck operations of recoil
starter.
Does the unit
operate?
2st X50D2 2011
Starting System
NO
NO
Shift into neutral (N).
ES
Check ignition system
and/or fuel system.
Repair or replace
recoil starter.
GB
9
9-3