Power Unit
3 Reel
4 Starter Shaft Bolt
5 Starter Spring
5-96
1
1
2
2
a
a
3
3
2
2
5
4
33) Disassembly of Recoil Starter
Loosen screw and disconnect starter lock cable 1
1.
(upper).
2.
Remove bolts, and then, remove recoil starter.
Put rope 2 in the groove a of reel 3 and gently turn reel
3.
clockwise to release tension of starter spring.
Wear the glove to protect your hands.
For replacing starter rope 2 only, do not remove
reel. Loosen the tension spring, and then replace
rope. Then, install new rope and put in groove
and turn counterclockwise 5 or 6 rounds to get
tension on spring.
Remove starter shaft bolt 4, and then, remove all of
4.
illustrations.
The starter spring 5 can pop out suddenly;
do not nearby your face.
CAUTION
CAUTION
2st X50D2 2011
GB