TOHATSU MX 50D2 Service Manual page 206

Power Unit
9 9
0 0
5-28
5.
6 6
6.
7 7
7.
8 8
8.
9.
Disconnect cooling water hose 6 (exhaust cover - water
check port)
Disconnect fuel hose 7 from fuel filter (fuel connector -
fuel filter)
Remove choke rod 8.
Remove apron 9 and loosen engine mount bolts, then
remove them.
Carefully pry power unit by using steel pipe 0 to remove
power unit.
Easy to remove, when the part where the fulcrum
and action point are close is raised.
GB
2st X50D2 2011