Tools And Instruments; Test Propeller; Measuring Instruments - TOHATSU MX 50D2 Service Manual

Service Information
MX50

Test Propeller :

P/N. 3C8-64110-0
Outer : 198mm
Width : 40mm
Model
MX50D2

2) Measuring Instruments

For the following measuring instruments, use commercially available ones.
Circuit tester
Vernier calipers
Micrometer
Cylinder gauge
Ring gauge
Dial gauge
Thickness gauge
V block
Surface plate
Dial gauge magnet base or dial gauge stand
1-8
Rotational speed at WOT
(Wide Open Throttle) (r/min)
5000-5800
( Resistance : 1Ω, 10Ω, 10 kΩ, AC voltage : 30 to 300V, DC voltage : 30V, Internal voltage 3V or less )
( M1 type, 300 mm )
( minimum graduation of 0.01, outer, 0 to 25 mm, 25 to 50 mm, 50 to 75 mm )
( 4 to 6 mm, 10 to 25 mm, 25 to 30 mm, 50 to 75 mm )
( ø5.5, ø16, ø25, ø30, ø61)
( minimum graduation of 0.01 )
( 0.03 to 0.3 mm )
( 500 mm x 500 mm )

3. Tools and Instruments

1) Test Propeller
MWX50
Test Propeller :
P/N. 3F3-64110-0
Outer : 236mm
Width : 45mm
Model
MWX50D2
GB
Rotational speed at WOT
(Wide Open Throttle) (r/min)
5000-5800
2st 50D2 2011