Disassembly Of Crank Shaft; Inspection Of Crank Shaft - TOHATSU MX 50D2 Service Manual

Power Unit
3
2
1
4
5
6
a
5-56

15) Disassembly of Crank Shaft

Remove "C" ring 1 and pull out washer 2.
1.
Remove main bearing (lower) 3 by using universal puller
plate and universal puller.
Universal Puller Plate 4 :
Puller 5 :
Protecting Plate 6 :

16) Inspection of Crank Shaft

1. Visually check crank shaft ass'y upper and lower end
bearings for flaws, wear and other damages. Replace
a crank shaft ass'y if necessary.
Specified Value
3AC-99750-0
Commercially Available Item
a :
#1, Top ø40.0 mm (1.574 in)
#3, Bottom ø40.0 mm (1.574 in)
GB
2st X50D2 2011