Cleaning And Inspection - TOHATSU MX 50D2 Service Manual

Fuel System
3
4-22

3) Cleaning and Inspection

1. Check carburetor body for crack, damage and dirt. Replace
or clean as necessary.
Check main jet 1, main nozzle 2 and slow jet 3. for dirt,
2.
and replace if necessary.
2
1
3. Check tip of needle valve, and replace if necessary.
4. Check float for crack and damage, and replace if necessary.
CAUTION
Use cleaning solution to remove dirt. Blow
passages with compressed air to remove
dirt. Do not use wire to remove dirt.
GB
2st 50D2 2011