Inspection Of Cam Rod And Clutch Cam; Assembly Of Cam Rod And Clutch Cam; Removing Drive Shaft; Disassembly Of Drive Shaft - TOHATSU MFS 9.9 Owner's Manual

Lower Unit

18) Inspection of Cam Rod and Clutch Cam

Check cam rod 1 and clutch cam 2 for crack and wear.
1.
Replace if necessary.

19) Assembly of Cam Rod and Clutch Cam

1. Reassemble.
Be careful of direction of cam rod.

20) Removing Drive Shaft

Remove pinion (B) gear nut, remove drive shaft ass'y 1 and
1.
pinion (B) gear 2, and draw out forward (A) gear.
Bevel Gear B Nut Socket 3 :
P/N. 350-72232-0
Bevel Gear B Nut wrench 4：
P/N. 346-72231-0
· When removing drive shaft, be careful not to
give damage to shim on the bearing outer
race and not to lose the part. Shim is
reusable.
· Replace shim with new one of the same
thickness if any deformation or damage is
found on it.

21) Disassembly of Drive Shaft

Remove drive shaft bearing 1.
1.
Before removing, check bearing for play or
deflection. Replace if necessary.
Do not reuse bearing. Be sure to replace
with new one.
Universal Puller Plate 2 :
P/N. 3AC-99750-0
6-16
CAUTION
1
Forward
direction
GEAR GEAR
2
GEAR
3
1
2
1
2
4
2
4st 9.9/15/20 2008