Removing Intake Manifold And Reed Valves; Inspection Of Reed Valve Ass'y - TOHATSU MX 50D2 Service Manual

Power Unit
2
1
1 1
5
6
10
9
11
12
7
8
3
4
2 2
5-40
6) Removing Intake Manifold and
Reed valves
1. Loosen intake manifold mounting bolts and remove intake
manifold 1 in the order shown.
2. Loosen reed valve mounting screws, remove them, and
remove reed valve ass'y 2.

7) Inspection of Reed Valve Ass'y

1. Check reed valve and valve seat surface for bend, wear
and damage. Replace if the bend is out of the specified
range.
Reed Valve Stopper Height b :
9.3 - 9.5 mm (0.366 - 0.374 in)
Reed Valve Bend a :
0.4 mm (0.016 in)
GB
2st X50D2 2011