Inspection Of Cam Rod And Clutch Cam - TOHATSU MFS25 Service Manual

Lower Unit

18) Inspection of Cam Rod and Clutch Cam

Check cam rod 1 and clutch cam 2 for crack and wear.
1.
Replace if necessary.
19) Assembly of Cam Rod and Clutch Cam
1. Reassemble.
Be careful of direction of cam rod.
20) Removing Drive Shaft
Remove pinion nut (B gear nut), remove drive shaft ass'y 1
1.
and pinion gear (B gear) 2, and draw out forward gear (A
gear).
Bevel Gear B Nut Socket 3 :
P/N. 346-72232-0
Bevel Gear B Nut Wrench 4 :
P/N. 346-72231-0
• When removing drive shaft, be careful not to
give damage to shim on the bearing outer race
and not to lose the part. Shim is reusable.
• Replace shim with new one of the same
thickness if any deformation or damage is
found on the removed shim.
21) Disassembly of Drive Shaft
Remove drive shaft bearing 1.
1.
Before removing, check bearing for play or
deflection. Replace if necessary.
Do not reuse bearing. Be sure to replace
with new one.
Universal Puller Plate 2 :
P/N. 3AC-99750-0
6-16
CAUTION
1
GEAR GEAR
GEAR
2
3
1
2
1
2
4
2
25/30 2006