Disassembly Of Drive Shaft Ass'y; Inspection Of Drive Shaft - TOHATSU MD 70-90C2 Service Manual

Lower Unit

23) Disassembly of Drive Shaft Ass'y

Remove outer race 1 and shim 2.
1.
Remove drive shaft spring 3.
2.
Remove taper roller bearings 4 and 5 by using press
3.
and universal puller 6.
Do not reuse removed bearing.
Be sure to replace with new one.
· Check bearing for play or deflection before
removing, and replace if necessary.
· When putting universal puller plate on the
bearing, hook the tip of puller's claw on the
inner race of bearing correctly.
Universal Puller Plate 6 :
P/N. 3AC-99750-0

24) Inspection of Drive Shaft

1. Check drive shaft for bend and wear.
Replace if necessary.
2. Measure drive shaft runout.
Runout Limit :
0.3 mm (0.012 in)
6-26
CAUTION
45 Bearings
Do not reuse.
45 Bearings
Do not reuse.
a
a Supporting Points
2
1
4
5
6
3
4
5
6
a
TLDI 75/90C2 2010