23) Disassembly of Drive Shaft Ass'y
Remove outer race 1 and shim 2.
1.
Remove drive shaft spring 3.
2.
Remove taper roller bearings 4 and 5 by using press
3.
and universal puller 6.
· Check bearing for play or deflection before
removing, and replace if necessary.
· When putting universal puller plate on the
bearing, hook the tip of puller's claw on the
inner race of bearing correctly.
Do not reuse removed bearing.
Be sure to replace with new one.
Universal Puller Plate 6 :
P/N. 3AC-99750-0
TLDI 115A 2007
CAUTION
45 Bearings
Do not reuse.
45 Bearings
Do not reuse.
2
1
4
5
6
3
6
4
5
6
6-27