Installing The Reader Heater; Checking Parts To Install - Canon iR3245 Series Service Manual

Chapter 2
3) Fit the support plate's cutoff [2] of the document tray [1] with the stepped
screws [3] installed in the previous step.
[2]
B: If the card reader is equipped to the host machine.
1) Remove the 2 face cover seals [1]. (Do not use the removed face cover
seals.)
2) Install the 2 stepped screw (M4X10.8) [1] with the reader right cover.
2-22
[1]
F-2-85
[3] [1]
[2]
F-2-86
[1]
F-2-87
3) Fit the support plate's cutoff [2] of the document tray [1] with the stepped
screws [3] installed in the previous step.
[2]

2.8 Installing the Reader Heater

2.8.1 Checking Parts to Install

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Be sure to have the following parts ready because each part of the Reader
Heater is supplied as Service Parts.
[1]
F-2-88
[3]
[1]
[2]
F-2-89
0019-5566