Canon iR3245 Series Service Manual page 542

Chapter 17
Item Level
50DF-RG 1
50DF-GB 1
100DF-RG 1
100DF-GB 1
17-44
COPIER > ADJUST > CCD
Description
Title Color displacement (G-R) offset value display at ADF mode/50% scanning
Purpose When executing RAM clear of reader controller PCB, when replacing reader controller PCB
Note - Be sure to enter the value on service label when executing RAM clear of the reader controller PCB/
replacing the reader controller PCB
- If changing the setting value of this item, be sure to write down the changed value on the reader's
service label.
Settings/Adjustment range -256 to 256
Unit -
Amount of change per unit -
Value at RAM clear/ 0/Yes
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode -
Supplementary info/Memo -
Title Color displacement (G-B) offset value display at ADF mode/50% scanning
Purpose When executing RAM clear of reader controller PCB, when replacing reader controller PCB
Note - Be sure to enter the value on service label when executing RAM clear of the reader controller PCB/
replacing the reader controller PCB
- If changing the setting value of this item, be sure to write down the changed value on the reader's
service label.
Settings/Adjustment range -256 to 256
Unit -
Amount of change per unit -
Value at RAM clear/ 0/Yes
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode -
Supplementary info/Memo -
Title Color displacement (G-R) offset value display at ADF mode/100% scanning
Purpose When executing RAM clear of reader controller PCB, when replacing reader controller PCB
Note - Be sure to enter the value on service label when executing RAM clear of the reader controller PCB/
replacing the reader controller PCB
- If changing the setting value of this item, be sure to write down the changed value on the reader's
service label.
Settings/Adjustment range -256 to 256
Unit -
Amount of change per unit -
Value at RAM clear/ 0/Yes
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode -
Supplementary info/Memo -
Title Color displacement (G-B) offset value display at ADF mode/100% scanning
Purpose When executing RAM clear of reader controller PCB, when replacing reader controller PCB
Note - Be sure to enter the value on service label when executing RAM clear of the reader controller PCB/
replacing the reader controller PCB
- If changing the setting value of this item, be sure to write down the changed value on the reader's
service label.
Settings/Adjustment range -256 to 256
Unit -
Amount of change per unit -
Value at RAM clear/ 0/Yes
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode -
Supplementary info/Memo -