Canon iR3245 Series Service Manual page 650

Chapter 17
Item Level
JA-JOB 2
JA-RESTR 2
LDAP-SW 1
FROM-OF 1
17-152
COPIER > OPTION > USER
Description
Title Setting of the target job for job archiving
Purpose of use, When used When the job archive function is enabled, archiving is performed when executing the job in
accordance with the specified job type of the target job.
Precautions for use The setting cannot be changed in the service mode; only reference is allowed. The setting can be only
made from the MEAP program supporting job archive.
Settings and adjustment 0: None, 3: Limited to FAX/IFAX
ranges
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and -
operation procedures
Related service modes -
Additional description and -
notes
Title Setting of restriction items for job archive
Purpose of use, When used When the job archive function is enabled, specification restriction operation is performed for the target
function in accordance with the setting made.
Precautions for use The setting cannot be changed in the service mode; only reference is allowed. The setting can be only
made from the MEAP program supporting job archive.
Settings and adjustment Bit0: Image file acquisition function (0: OFF, 1: ON)
ranges Bit1: Form registration composite function (0: OFF, 1: ON)
Bit2: Document edit function (0: OFF, 1: ON)
Unit 32 specification restrictions based on Bit definition
Value at time of shipment -
from factory/Value
established when RAM is
cleared
Setting, adjustment and -
operation procedures
Related service modes -
Additional description and -
notes
Title LDAP server search condition selector switch
Purpose of use, When used Set the search conditions when searching for email addresses, etc. from the LDAP server.
Precautions for use -
Settings and adjustment 0: '(Target) including next'
ranges 1: '(Target) excluding next'
2: '(Target) same as next'
3: '(Target) not the same as next'
4: '(Target) starting with next'
5: '(Target) ending with next'
Unit -
Value at time of shipment 4
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and LDAP: Lightweight Directory Access Protocol
notes The LDAP server registration can be performed by accessing the LDAP server registration from the
system control settings. Once registered, email addresses, etc. can be searched from it. The search
results (email addresses, etc.) can be registered on address lists, etc.
Title From address deletion switch when sending mail
Purpose of use, When used Set whether to delete the from address when sending mail.
Precautions for use -
Settings and adjustment 0: The from addresses are not deleted.
ranges 1: The from addresses are deleted.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes