Timer Settings; Adjustment/Cleaning - Canon iR3245 Series Service Manual

Item
Standard Local Print Settings
Paper Select
Copies
Finishing
2-Sided Print
Erase Document After Printing
Merge Documents
Language Switch
Reversed Display (Color)
Offset Jobs*2
Job Separator between Jobs
Job Separator between Copies
Job Duration Display
Number of Copies/Job Duration Status Display
Different Paper Sizes for the Output Tray*2
Cleaning Display for the Original Scanning Area*4 On*1, Off
Data Compression Ratio for Remote Scans
Gamma Value for Remote Scans
Limited Functions Mode*2
Shutdown Mode
Suspended Job timeout
Initialize Common Settings

1.2.3.3 Timer Settings

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
*1: Indicates the default setting.
Item
Time Fine Adjustment
Auto Sleep Time
Auto Clear Time
Time Until Unit Quiets Down
Daily Timer Settings

1.2.3.4 Adjustment/Cleaning

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
*1: Indicates the default setting.
*2: Indicates items that appear only when the appropriate optional equipment is attached.
*4: Indicates items that appear only when the appropriate optional equipment is attached to the imageRUNNER 3230/3225. For the imageRUNNER 3245/3245i/
3235/3235i, these items are displayed by default.
Item
Zoom Fine Adjustment
Saddle Stitcher Staple Repositioning*2
Saddle Stitch Position Adjustment*2
Creep (Displacement) Correction Adjustment
Auto Gradation Adjustment
Exposure Recalibration
All Paper Sources, Auto*1
1*1 to 9,999 sets
If No Finisher Is Attached or Only the Optional Inner 2 Way Tray-D1 is Attached:
Do Not Collate, Collate*1, Rotate Collate, Group, Rotate Group
If the Optional Finisher-S1 Is Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner)
If the Optional Finisher-S1 and Puncher Unit-R1 Are Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner), Hole
Punch
If the Optional Finisher-AE1 or Saddle Finisher-AE2, and Buffer Pass Unit-E2 Are
Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top
Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right)
If the Optional Finisher-AE1 or Saddle Finisher-AE2, and Buffer Pass Unit-E2 and
Puncher Unit-M1 Are Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top
Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right), Hole Punch
On, Off*1
On, Off*1
On, Off*1
On, Off*1
On, Off*1
On*1, Off
On, Off*1
On, Off*1
Copy: On, Off*1
Mail Box: On, Off*1
Other: On, Off*1
On*1, Off
On*1, Off
High Ratio, Normal*1, Low Ratio
Gamma 1.0, Gamma 1.4, Gamma 1.8*1, Gamma 2.2
On, Off*1
Press [Start]
On(0 to 999 minutes, in one minute increments, 5minutes*1), Off*1
Initialize
T-1-5
00:00 to 23:59, in one minute increments
10 seconds, 1*1, 2, 10, 15, 20, 30, 40, 50 min., 1 hour, 90 min., 2, 3, 4 hours
0 (Off) to 9 minutes, in one minute increments; 2 min.*1
0 (Off), to 9 minutes, in one minutes increments; 1 min.*1
Sunday to Saturday, 00:00 to 23:59, in one minute increments
T-1-6
X, Y: -1.0% to +1.0%, in 0.1% increments; 0.0%*1
Press [Start]
All paper sizes: -2.0 mm to +2.0 mm, in 0.25 mm increments; 0.00 mm*1
Correction (for each paper type) 0.000" to 0.078" (0.00 mm to 2.00 mm), in 0.002" (0.05
mm) increments; 0.010" (0.25 mm)*1
Automatic after the machine prints and scans three sets of test prints
Copy/Inbox, Send:
Light, Dark: 1 to 9 levels; 5*1
Settings
Settings
Settings
Chapter 1
Delivered
No
Yes
Yes
Yes
Yes
No
No
No
Yes
No
Yes
Yes
Yes
No
Yes
No
0018-9672
Delivered
No
Yes
Yes
Yes
Yes
0018-9673
Delivered
No
No
Yes
No
No
No
1-13