Canon iR3245 Series Service Manual page 340

Chapter 10
Points to Note When Installing the Right Cover
Be sure to fit the claws (protrusion) at the end plate of the host machine in
the corresponding holes of the hinges and then tighten the screws.
If not, the right cover may not correctly close.
The double hinge is employed for the right cover of the equipment.
Accordingly, cautions must be taken when installing the right cover; and
therefore, the following caution label is affixed to the end plate of the host
machine.
[1] Fit the claw to the hole.
[2] Tighten with screws.
10-38
[1]
[2]