4.7.3.2 Removing the SDRAM (for system processing)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover. (page 10-17)[Removing the Upper Rear
Cover]
2) Release the 2 levers [1] and remove the SDRAM (for system processing)
[2].
[1]
[1]
4.7.4 HDD
4.7.4.1 Removing the HDD
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
- Take care not to cause a breakage due to electrostatic discharge.
- Take care not to damage the HDD.
1) Remove the upper rear cover. (page 10-17)[Removing the Upper Rear
Cover]
2) Remove the HDD unit [1].
- 2 screws [2]
- 2 connectors [3]
[2]
4.7.5 Wireless LAN PCB
4.7.5.1 Removing the Wireless LAN PCB
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
[2]
[1]
[2]
[1]
F-4-26
[1]
[3]
F-4-27
1) Free the antenna cable [1] from the terminal [2].
0019-2778
0019-0022
2) Pull out the wireless LAN PCB unit [1].
- 2 screws [2]
0019-3196
[2]
[1]
F-4-28
[2]
[1]
F-4-29
Chapter 4
[2]
4-15