Canon iR3245 Series Service Manual page 721

3) Click [OK]. Return to the previous page.
6) Start up the machine. The subsequent procedure differs depending on the download mode.
- If the machine is in normal mode
6-1) Click [Shutdown].
6-2) Click [Start Shutdown] so that the machine starts the shut-down sequence.
The main power switch turns OFF automatically.
6-3) Click [OK].
6-4) Turn on the machine's main power switch.
The downloaded system software is written to HDD or flash ROM.
After writing is complete, the message that prompts the shutdown is displayed on the control panel.
- If the machine is in safe mode
6-1) After 10 sec from when the main power switch of the machine turns OFF, turn ON the main power switch.
The downloaded system software is written to HDD or flash ROM.
After writing is complete, the message that prompts the shutdown is displayed on the control panel.
7) Press reset key.
The main power switch turns OFF automatically.
8) After 10 sec from the power OFF, turn ON the main power switch.
Message
The downloaded firmware has been deleted.
O
ServiceSupportTool DLM10 (Ver. X.XX E)
SelectableFirmware Control
Select the firmware to be downloaded, Click the button of the task to be
then click the [Start] button.
executed.
SelectableFir mware
iR3245
Download Firmware
ASR
BROWSER
DCON
Upload Data
HELP
LANGUAGE
MEAPCONT
Download Data
XXxxvXXXX
MEDIA
Restore Backup System
RCON
RUI
SYSTEM
Format HDD
TTS
WebDAV
Shutdown
Return to Main Menu
F-18-42
Message
Have you finished downloading and want to star t
shutdown sequence for restar ting machine ?
Start Shutdown
Cancel
F-18-43
Message
Follow the instructions shown on the machine for
shutdown process.
Click [OK] button to return to Main Menu.
O K
F-18-44
K
172.16.1.100
iR3245
NORMAL
C l e a r
RCON
XXxxXXXX
RUI
XXenXXXX
MEAPCONT
XXxxXXXX
LANGUAGE
XXjaXXXX
XXenXXXX
SDICT
XXjaXXXX
BOOT
XXxxXXXX
TTS
XXjaXXXX
XXenXXXX
BROWSER
XXxxXXXX
HELP
XXxxXXXX
Star Start WEBDAV
XXxxXXXX
ASR
XXjaXXXX
XXenXXXX
MEDIA
XXjaXXXX
XXenXXXX
Chapter 18
18-27