Detail In E602 - Canon iR3245 Series Service Manual

Chapter 16
Code
E602 There is an error on the hard disk.
0001 [Cause] An HDD detection error has occurred. The HDD cannot be
detected. The HDD does not become ready. The HDD returns an
error.
[Detection] while boot ROM is in session
BARSAC startup, mounting
(usrIde)
[Timing of Detection] once at startup
0002 [Cause] There is no startup file. The program for the main CPU does
not exist on the HDD or in BOOTDEV/BOOT, and so on.
[Detection] while boot ROM is in use
at time of system file loading (usrIde)
[Timing of Detection] once at startup
0003 [Cause] An HDD write abort error has occurred. The sectors for
BOOTDEV on the HDD cannot be read.
[Detection] BARSAC (all; at time of bootable startup)
[Timing of Detection] once at startup
0006 [Cause] A subbootable that matches the PDL type does not exit in
BOOTDEV/BOOT.
[Detection] during loading of sub boot in oclibroot
[Timing of Detection] once at bootable startup
0009 [Cause] there is no necessary FONT file in /BOOTDEV/BOOT.
[Location to be detected] each point
[Detection timing] detected when executing report print, X/IFAX
communication, stamp print
0012 [Cause] damage/deletion of file on HDD referred by WEB browser
[Location to be detected] initialization of web browser
[Detection timing] Archive cannot be found in /BOOTDEV/BROWS
by reextracting (reloading) web browser's file when failed to extract
(load) web browser's file in /APL_GEN/NetFront.
2000 Error in authentication between the host machine and encryption
board
2001 Mismatch in the operation of encryption board
2002 Fault in the encryption board, etc.
01XX /DOSDEV is faulty.
02XX /FSTDEV is faulty.
03XX /DOSDEV2 is faulty.
04XX /FSTPDEV is faulty.
05XX /DOSDEV3 is faulty.
06XX /PDLDEV is faulty.
07XX /DOSDEV4 is faulty.
08XX /BOOTDEV is faulty.
09XX /DOSDEV5 is faulty.
10XX Abnormal /APL_MEAP
11XX Abnormal /APL_SEND
12XX Abnormal /APL_KEEP
13XX Abnormal /APL_LOG
FFXX There is an error in a partition that cannot be identified.

16.1.7 Detail in E602

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
<E602-XXYY>
XX= "00"
16-8
T-16-6
Cause Remedy
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
1. Download SYSTEM again.
2. Check that the font file is located in /BOOTDEV/BOOT.
Reinstall WEB browser contents using download tool.
(If failed to recover, replace HDD because HDD could have been
damaged)
- Check connection of encryption board (turn OFF and then ON the
power)
- Use SST to execute key clear of the encryption board (HDD needs
to be formatted because HDD is not formatted. System firmware
needs to be reinstalled)
- Use SST to execute key clear of the encryption board (HDD needs
to be formatted because HDD is not formatted. System firmware
needs to be reinstalled)
- Check connection of the encryption board (turn OFF and then ON
the power)
-Use SST to execute key clear of the encryption board (HDD needs
to be formatted because HDD is not formatted. System firmware
needs to be reinstalled)
-After replacing the encryption board, format HDD and reinstall
SYSTEM using SST.
-Replace the main controller PCB.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
See the details under 602.
0019-7493