Installing The Deck Heater; Checking The Parts To Install; Turning Off The Power Of The Host Machine; Installation Procedure - Canon iR3245 Series Service Manual

[1]
[4] [3]
22) Connect the host machine's power plug to the outlet, and then turn ON
the main power switch.
23) Turn on the environment heater switch.
24) Install the environment heater switch cover.

2.11 Installing the Deck Heater

2.11.1 Checking the Parts to Install

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Every components of the cassette heater unit are supplied as service parts, so
have the following parts on hand.
[2]
[4]
[8]
[7]
No. Part name
[1] Heater unit
[2] Power supply code base
[3] Relay harness unit
[4] AC cable
[5] Screw (w/ washer)
[6] Cable protection bush
[7] Power supply label
[2]
F-2-142
[1]
[3]
[5] [6]
[9] [10]
F-2-143
T-2-7
Part number Qty.
FG6-9651-000 1pc.
FG6-1117-000 1pc.
FG6-2957-000 1pc.
FK2-1777-000 1pc.
XA9-0266-000 2pcs.
WT2-5098-000 1pc.
FS6-8725-000 1pc.
No. Part name
[8] Screw (RS tight; M4X8)
[9] Screw (Binding; M4X4)
[10] Plug cover

2.11.2 Turning OFF the Power of the Host Machine

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Be sure to refer to "Points to Note When Turning OFF the Main Power" in
installation of the host machine.

2.11.3 Installation Procedure

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
In order to operate the cassette heater unit, it is required to install the
cassette pedestal heater kit.
Refer to the corresponding page for its installation procedure.
0019-9911
Be sure to attach after installation of the host machine and the paper deck.
1) Disconnect the cable [1] of the paper deck from the host machine.
2) Hold down the paper deck release grip [1] to release the paper deck from
the host machine. Hold down the latch plate [2] with a finger to open the
compartment.
3) Remove the right cover [2] of the paper deck.
Chapter 2
Part number Qty.
XA9-0628-000 2pcs.
XB1-2400-409 1pc.
FC6-5776-000 1pc.
[1]
[1]
F-2-144
F-2-145
0019-9913
0019-9917
2-35