Downloading The System Software (Confirmation Execution When Version Is Downed The Same Version) - Canon iR3245 Series Service Manual

Chapter 18

18.4.6.4 Downloading the System Software (Confirmation execution when version is downed the same version)

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
[2]: Upgrade (w Confirmation)
System software on HDD and that on USB device are compared and if the system software on USB device is newer than that on HDD, it will be downloaded in
the temporary storage area on HDD.
If the system software on USB device is the same or older than that on HDD, the message whether or not to overwrite is displayed.
Unlike menu [1], the machine does not restart automatically after download is complete. Turn OFF/ON manually to execute the writing of the system software.
Procedure
1) Check to see that the Execute/Memory lamp on the control panel is off, and turn off the power of the machine as described below.
1-1) Hold down the power switch on the control panel for 3 sec or more.
1-2) Shut down the machine by following the instruction on the control panel.
The main power switch will turn off automatically.
2) Connect the USB device to the USB port.
3) Start the machine in appropriate download mode.
4) Press the key on the control panel.
[2] -> [0]: execute download / other than [0]: go back to Menu screen
While downloading is under way, the control panel shows its progress.
MEMO:
If the system software on USB device is the same or older than that on HDD, the message whether or not to overwrite is displayed each time. Press the key on the
control panel.
[0]: overwrite / other than [0]: do not overwrite
At the end of downloading, a message will appear asking you to press a key.
5) Press any key.
In case of normal mode, shutdown sequence is executed.
6) When a message appears asking you to turn off the power, turn off the main power switch.
7) Remove the USB device.
18-38
F-18-60
F-18-61
0019-6459